Pellet store lid

with fan

for maximum protection

SET for € 395,00

(price for 1+1 piece incl. 20 % VAT, excluding shipping)

This particularly safe version of our lid is used for forced ventilation of the pellet storage room, so that ventilation is ensured even better. To avoid odor formation and the deliberate extraction of unwanted gases, such as carbon monoxide from the storage room, we recommend this version.

The built-in fan has a power of 4.7 W with a service life of 180,000 h specified by the manufacturer. The operating noise is 47 dB(A). The actual achievable volume flow depends on the pressure within the system. At a pressure difference of 25 Pa, the fan we use has a volume flow of 60 m³/h. This drops to 55 m³/h at a pressure difference of 50 Pa, approximately here from the air resistance of the piping. Higher pressure differences should be avoided or specially considered in the design. The ventilator cover is connected to a standard 230 VAC socket with a Schuko plug via an approx. 3 m long cable using a power supply unit supplied.

The set includes two pieces of ventilator lids - one with a fan and one with an insect screen, which allows the supply of fresh air. Both lids have a safety sticker of HCP GmbH and can be ordered optionally with safety chain and cylinder lock.

An instruction manual with safety instructions for the installation and the standard-compliant use of the filling spout closure with ventilator suction is provided. 

Version: STORZ 110-A according to DIN 14323

 

Note: On request the label can be printed with your design.

 

Filler lid for pellet storage room

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.